[sib-access] Re: writing rhythm charts/ slash charts for bands

I did not know that. I can't check now but will have to do so later tonight.

Dave Carlson
Produced on a Nokia N95 using Nuance TALKS screen-reading software.

-original message-
Subject: [sib-access] Re: writing rhythm charts/ slash charts for bands
From: "Howerton, Brian Scott" <bshowerton@xxxxxxxxxxx>
Date: 06-14-2010 06:20

Dave,
On the website, it says that this pluggin is used for sibelius 6.
________________________________________
From: sib-access-bounce@xxxxxxxxxxxxx [sib-access-bounce@xxxxxxxxxxxxx] On 
Behalf Of Dave Carlson [dgcarlson@xxxxxxxxxxxxx]
Sent: Friday, June 11, 2010 1:25 AM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: writing rhythm charts/ slash charts for bands

Brian,

Yes, there is a plug-in you can download from the Sibelius web site that
does exactly that -- changes notes to slash and puts them on the center line
of the staff.

The file is called: FillSelectionWithSlashNotes.zip

Dave

----- Original Message -----
From: "Howerton, Brian Scott" <bshowerton@xxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Thursday, June 10, 2010 19:32
Subject: [sib-access] writing rhythm charts/ slash charts for bands


Hello,
I am a music director for a church, and I am going to start writing rhythm
charts out for our band using slash notation.  Can this be done in sibelius
and if so how would I go about doing this?  Has anyone written out a rhythm
chart before with chords, lyrics, using slash notation?  Thanks for any
help,
BrianIf you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

Other related posts: