Steph, You would set your selection filter to only select the notes in voice x. This is a choice in the Edit/Filter menu. So first select the entire staff with the voice (melody) you want. Then use Edit/filter and arrow down until you find Voice x only and hit enter. You can verify that you've selected what you think by pressing f5 right after that. Then Ctrl-C to copy and then escape. Then navigate to the same starting point in your piano tremble staff and press Ctrl-v. As to Soprano/Alto on treble, and Tenor/Bass on Bass staves, that sounds correct for the chorale staves. But I don't know if the piano player wants it exactly the same? If so, then that's the way to do it. Dave ----- Original Message ----- From: "Stephanie Mitchell" <mumwith2kids@xxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Wednesday, February 10, 2010 15:11 Subject: [sib-access] Re: piano questions How would this affect the lyrics? I wouldn't want _this on the treble too? Is it normal to have soprano and alto on the treble, and tenor and bass on the bass staff? Thanks, looks like you'd saved me a lot of work! Steph If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx