[sib-access] Re: just installed and noticed

Ok, thanks.  I think I did miss that step, i pressed the insert 
and the 3 on the number pad.  The list views that didn't work 
were in the plug in dialogue boxes.  It wouldn't read them if I 
used the down arrow, but if i pressed tab and then shift tab it 
would tell me what I was on.
Thanks for your help, I will try again.
Steph


> ----- Original Message -----
>From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx
>To: <sib-access@xxxxxxxxxxxxx
>Date sent: Sun, 21 Dec 2008 09:11:58 -0000
>Subject: [sib-access] Re: just installed and noticed

>Steph,

>I don't understand why JAWS  isn't reading the list views out for 
you.  I've
>just checked the site and it works fine from this end.  Could you 
describe
>the problems you're having reading them?

>As for the instructions, you may be missing out the "pass key 
through" step.
>In brief, when you go to the add keystroke dialog, you must press 
Insert+3
>before typing Control + GraveAccent.

>Dan Rugman

>visit the new on-line resource for visually impaired musicians 
and home of
>Sibelius Access.
>www.musicaccess.co.uk

>-----Original Message-----
>From: sib-access-bounce@xxxxxxxxxxxxx
>[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Stephanie 
Mitchell
>Sent: 21 December 2008 04:19
>To: sib-access@xxxxxxxxxxxxx
>Subject: [sib-access] Re: just installed and noticed

>I tried to follow the directions on the site.  Jaws wouldn't read 
the
>listviews well.  Then when I did find the add keystroke part, I 
couldn't do
>it.  It said that the plug-in was disabled.  I pressed the 
keystroke again
>and was enabled.
>Steph


>> ----- Original Message -----
>>From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx
>>To: <sib-access@xxxxxxxxxxxxx
>>Date sent: Sat, 20 Dec 2008 20:00:21 -0800
>>Subject: [sib-access] Re: just installed and noticed

>>Stephanie,

>>This has been addresses.  Look at the web site and you'll find a
>page with
>>fixes, this being one of them.

>>Dave

>>----- Original Message -----
>>From: "Stephanie Mitchell" <praisehimau@xxxxxxxxx
>>To: <sib-access@xxxxxxxxxxxxx
>>Sent: December 20, 2008 7:03 PM
>>Subject: [sib-access] just installed and noticed


>>Hi all.
>>I just installed sebalius and the scripts.  I am working through 
the
>>help files.  I tried navigating the score, and it just tells me 
the
>>same bar and beat no matter what I do.
>>What is causing this and how do I fix it?
>>Thanks.
>>Steph
>>If you wish to unsubscribe, send a blank message with the single 
word,
>>unsubscribe - in the Subject line to:
>>sib-access-request@xxxxxxxxxxxxx

>>If you wish to unsubscribe, send a blank message with the single 
word,
>>unsubscribe - in the Subject line to:
>>sib-access-request@xxxxxxxxxxxxx
>If you wish to unsubscribe, send a blank message with the single 
word,
>unsubscribe - in the Subject line to:
>sib-access-request@xxxxxxxxxxxxx


>If you wish to unsubscribe, send a blank message
>with the single word, unsubscribe - in the Subject line to:
>sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

Other related posts: