Yes, let's not be diverted from the Beta 2 project. ...still salivating! Dave ----- Original Message ----- From: "Tim Burgess" <tim@xxxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Tuesday, March 10, 2009 2:15 PM Subject: [sib-access] Re: is annybody fit in jaws scripting Hi, A lot of thought has been put into preparing Sibelius Access for multi-language support and the core code is designed to be easily translatable, but we're not there yet and would advise against anybody trying to perform a language pot until we've got an official V1 release out there and proven. Providing solid multi-language support is no trivial programming task if it's to be done properly, so we'd ask for patience on this issue. Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Oliver Zenz Sent: 10 March 2009 19:11 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] is annybody fit in jaws scripting Hi all, though there are some within this list, who doesnt use english windows, like me, i thought it might be quite useful to make all language changes automaticly, when starting Sibelius. the problem is, i am absolutely bad in scripting: for an example, i thought it might be quite nice, to have the keyboardlayout automaticly changed such like: at the top of the script: typekey ("alt+shift") this should work on computers like mine, where there is only a german and an us english keyboardlayout. Would it? Now there is the next problem: how would i script to have the jaws language changed? does anny body know the correct syntax? and at least, can i script to turn numpad on? thank you and ciao, Oliver If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx