[sib-access] Re: can't get plug-in to run

It is under my user name for sure.
Gord
----- Original Message ----- 
From: "Justin Kauflin" <BlindGuy500@xxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Monday, October 19, 2009 11:08 PM
Subject: [sib-access] Re: can't get plug-in to run


Gordon,
     I had a similar problem.  Is it possible that you didn't install the
Sibelius files in the correct location?  I had installed the Sibelius folder
under All Users, but when I copied it to the folder under my user name, it
worked.  You might want to double check where you copied the Sibelius
folder.  Just a suggestion.

Justin Kauflin
http://www.justinkauflin.com
757-630-6329

--------------------------------------------------
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
Sent: Monday, October 19, 2009 8:17 PM
To: <sib-access@xxxxxxxxxxxxx>
Subject: [sib-access] Re: can't get plug-in to run

> The scripts are running.  I have them in both jaws 10 and 11.
> Gord
> ----- Original Message ----- 
> From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
> To: <sib-access@xxxxxxxxxxxxx>
> Sent: Monday, October 19, 2009 4:44 PM
> Subject: [sib-access] Re: can't get plug-in to run
>
>
> Gordon,
>
> Are you sure you copied the JAWS scripts to the correct folder? Don't know
> what else it could be.
>
> Dave
>
> ----- Original Message ----- 
> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> To: <sib-access@xxxxxxxxxxxxx>
> Sent: Monday, October 19, 2009 12:18
> Subject: [sib-access] can't get plug-in to run
>
>
> Hello.
> I have installed sib 5.2 and done all the necessary steps to get sib
> access
> rc1 installed.  I can't get the access plug-in to run, even after checking
> the keyboard shortcuts in both sibelius and jaws keymap.  I have tried it
> under both jaws 10 and 11.  Do you have any other ideas?  I did rerun the
> reg keys and all that.  Using a desktop layout.
> Thanks
> Gord
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx

Other related posts: