i did, and i enabled the blug in, and the key stroke, control ` but the same, dear Any ideas Cheers Ramy Moustafa ----- Original Message ----- From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Wednesday, January 14, 2009 12:43 AM Subject: [sib-access] Re: Sib access problem again > Ramy, > > Go to the FAQ on the sib access web site. Your answer is there. > > Dave > > ----- Original Message ----- > From: "Ramy Moustafa" <moshtaqlealganna@xxxxxxxxx> > To: <sib-access@xxxxxxxxxxxxx> > Sent: January 12, 2009 10:40 PM > Subject: [sib-access] Sib access problem again > > > hi all: > > i installed the sibelius 5.2 and the sib speaking with jaws 8, > > and i enable the blug in, > but i load a score with only one staff in it, when i hit write or left > errow, i got "nothing selected press tap" and when i hit tap, i got, count > 1 > par 4. > > And, on my other machine, > when i do anytnig i got, > stop blug in. > > nothing changed i make a restart etc but the same problem, > any ideas well be highly abbreciated. > Thanks > Cheers > Ramy Moustafa > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx