Richard, Ctrl+1? Do you mean Ctrl+F1? If you open the plug-in menu (Alt+u) do you have a submenu called "access"? If not, then I recommend going over the entire installation of Sib-Access again to make sure all portions (JAWS, Registry, Application Data) have been installed. I don't know anything about Windows 7 so I'm only looking at the functionality of Sib-Access itself. Dave Created in the Audio Recording and Mixing Studios, San Jose, California ----- Original Message ----- From: "Richard Andersson" <anderssonpost@xxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Saturday, November 06, 2010 07:16 Subject: [sib-access] SV: Re: Sebelius acces on Windows 7 I have already got Windows 7 to run in Windows XP compatibility mode. That was the only way I could get Sibelius 5 to work. My problem now is that Sibelius acces doesn't start when I press control+1 when I'm in Sibelius. Best Richard -----Oprindelig meddelelse----- Fra: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] På vegne af Tim Burgess Sendt: 6. november 2010 14:44 Til: sib-access@xxxxxxxxxxxxx Emne: [sib-access] Re: Sebelius acces on Windows 7 Hi, You'll only get this to work if you're using one of the non-Home Windows 7 versions, such as Pro. If you are then you can adjust the properties of the Sibelius shortcut to allow it to run in Windows XP compatibility mode. Can you please confirm which flavour of Windows 7 uyou've got? Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Richard Andersson Sent: 06 November 2010 09:01 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Sebelius acces on Windows 7 Hi I cann't get Sebelius acces to work on my computer, which have Windows 7 installed. Do anybody know if there are other instructions how to install Sebelius acces, when you use Windows 7? Thanks Richard If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx