Claudio, From the menus choose File > Print all parts. The number of times each part is printed is shown along side the name of the part in the parts window. I've just realised that there's a gap in the scripts here. To change the number of copies you need to up and down arrow through the list of parts in the parts window. Then route JAWS to PC and find the number which is to the right of the part name and left click it once. This opens the edit box that you can use to change it. I'll definitely need to do something about this. Dan Rugman visit the new on-line resource for visually impaired musicians and home of Sibelius Access. www.musicaccess.co.uk -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Claudio Sacco Sent: 30 March 2009 15:45 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Part extraction disappeared To everybody I need urgent help for part extraction. I did this a lot in Sibelius3, but where is it in Sibelius5? I went a couple of times through all menus, but I don't find it. What am I doing wrong or does Sibelius have a dynamic menu? Many thanks in advance for help. Regards Claudio If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx