Here's the deal, everyone. There's apparently a difference between my memories of Sibelius 3 and the reality of Sibelius 5 and that difference is this. I think it used to be that once you got into the chord symbols in a chart, you could progress through chord symbols in a chart from beginning to end. Now, the situation is that you appear to progress through the chord symbols of, say, a first bar and then you are put in the staff of the second bar, after which you are shown the chord symbols for that second bar. Jus thought you'd like to know. Dave, I wasn't interested in moving the chord symbols as much as I was interested in finding out why I couldn't simply tab to them. The reason was because I was expecting the chords to be attached to a staff other than the staff to which they actually were attached. Kevin -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson Sent: Friday, January 23, 2009 2:07 PM To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: Follow-up to chord symbol request K, Edit menu, filter, and one of the sub-selections should be chords. Failing that, then using the advanced filter and selecting text and chords in the multi-list box should allow you to select them all, then perhaps cut and paste to the treble clef staff. Also while selected use the styles menu and change the position to the default. I would expect that to place them above the staff instead of below the staff. Ideas to try. Dave ----- Original Message ----- From: "Kevin Gibbs" <kevjazz@xxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: January 23, 2009 12:10 PM Subject: [sib-access] Follow-up to chord symbol request I found the chord symbols. The guy who prepared the score wrote them below the treble clef staff of a piano part instead of above the bass clef of the same. The net effect is to put the chord symbols between staves but not where I expected them. That said, I still have a problem. If I go to bar 2 of the score in the right hand staff and shift tab, I go to the last chord symbol in bar 1 of the part, not the first chord symbol of bar 2 of the part. And, I can only read the chords in bar 1 before being put back on the bar rest in bar 2. I still need a recipe for putting myself on the first chord of a bar and, from there, being able to continue through all the chords of the part. Still don't know how to do that. Kevin If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx