[SI-LIST] termination


 A question for SI gurus:
 
 I have LVTTL driver with an output impedance of ~27 ohms.  This driver drives 
5 
equally spaced receivers.  The load capacitance of 4 of the receivers is 4pf 
each.  The load capcitance of my 5th receiver(DIMM module) is 60pf.  The Z0 of 
my t-line can vary between 50-75 ohms.  

Is a double-terminated bus design the best approach for terminating this 
configuration? Is there a better approach?

Thanks,

Parag Mody
Sun Microsystems 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: