[SI-LIST] simulation in SCRATCHPAD

 

Hi, 

I don't know appropriate this response is to your question , but I have
written 

a scratch pad program for myself, it is called NetviewII and it works only
in

conjunction with Hyperlynx - it will run stand alone , but probably doesn't 

have the desired output you desire.   I would like to hear about your needs 

and possibly I could incorporate "your needs" into my program?  If you want 

to correspond off line please write me at    epd2001usa@xxxxxxxxxxx[1] 

bye the way , I have sold some of my software...in the past. 

  

keith kowal 

epd 



  >From: "Wilco Hamhuis" >Reply-To: w.hamhuis@xxxxxxxxxxx >To: , >Subject:
[SI-LIST] Re: ISI simulation in SCRATCHPAD (XTK) >Date: Mon, 25 Mar 2002
11:13:58 +0100 >>>Hello Siva, >>I can help you with the first part. You can
generate different data patterns >with the multi driver contention file. The
mdc file specifies the times and >states of all drivers on a net. The file
has the following syntax: >>NET >NODE part pin edge_control_list >NODE ...
>ENDNET >>The net name must be identical to the desired net name in the
Topology >(.top) File. The part pin must be identical to the part/pin
specifications >in the topology file. The Edge Control List is a list of
time/state pairs, >separated by commas and surrounded by parentheses. For
more information >about the syntax check your xtk_user.pdf, page 282. Or if
you have that xtk >trainings manual page 208 and further. >>Enabling
multi-driver mode: >>For Xtk (Unix): >- specify the .mdc file in the design
control file (.xns) >example: FILES MULTIDRIVER_CONTENTION >>or use menu:
options >files >multi driver >>- set driver mode >1) options >defaults
>driver mode >multi >or 2) in design control file (xns): DEFAULTS
CONTENTION_MODE MULTI_DRIVER >>For Xtk (Nt): >basically the same as above,
except the menu to set driver mode is slightly >different: >>option
>defaults>simulations tab >driver mode >multi >>For Scratchpad (ePD2.0)
>>options >preferences >analyzer >defaults >driver mode >multi >>I haven't
found a way to enter the mdc file in Scratchpad. I guess that you >would
haveto find the xns file (.xns) and add the FILES >MULTIDRIVER_CONTENTION
statement. But I haven't checked that, so >I'm not 100% sure. >>I'm not
exactly sure what you mean with the ISI part. Maybe somebody else >can
comment on that part. >>Kind regards, >Wilco Hamhuis >HSSD consulting
engineer >>>-----Original Message----- >From: si-list-bounce@xxxxxxxxxxxxx
>[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Siva kumar >Sent: Friday,
March 22, 2002 7:10 PM >To: si-list@xxxxxxxxxxxxx >Subject: [SI-LIST] ISI
simulation in SCRATCHPAD (XTK) >>>>Hi Gurus, >I am doing Prelayout signal
integrity >analysis using Scratch pad (XTK). In scratch pad (in >simulation
preferences/options) i know how to give >period and duty cycle of the
stimulus. I want to force >different data patterns as stimuls. And also i
want to >analyze ISI (Inter Siganl Interference) on the nets. >Can anybody
suggest me the way how to do these things >in Scratchpad(XTK). >>thanks and
regards, >siva >>>__________________________________________________ >Do You
Yahoo!? >Yahoo! Movies - coverage of the 74th Academy Awards.
>http://movies.yahoo.com/
>------------------------------------------------------------------ >To
unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe'
in the Subject field >>or to administer your membership from a web page, go
to: >http://www.freelists.org/webpage/si-list >>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field >>List
archives are viewable at: >http://www.freelists.org/archives/si-list >or at
our remote archives: >http://groups.yahoo.com/group/si-list/messages >Old
(prior to June 6, 2001) list archives are viewable at:
>http://www.qsl.net/wb6tpu
>>>>------------------------------------------------------------------ >To
unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe'
in the Subject field >>or to administer your membership from a web page, go
to: >http://www.freelists.org/webpage/si-list >>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field >>List
archives are viewable at: >http://www.freelists.org/archives/si-list >or at
our remote archives: >http://groups.yahoo.com/group/si-list/messages >Old
(prior to June 6, 2001) list archives are viewable at:
>http://www.qsl.net/wb6tpu >>

----------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com[2].


--- Links ---
   1 mailto:epd2001usa@xxxxxxxxxxx
   2 'http://g.msn.com/1HM305401/13'
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: