[SI-LIST] Re: si-list Digest V1 #30

Hi, Chris:

I replied to your message from the si-list. It seems to me it did not go
through. I think the information in it should be helpful to you and I am
sending it again.
--------------------------------------------------------------
Hi, Chris:

Why don't you try our IE3D full-wave electromagnetic simulator and the
MDSPICE Mixed Domain SPICE simulator. I think it will meet most of your
needs. The IE3D and MDSPICE do not accept PADS's format. However, it accepts
GDSII and DXF. The IE3D can generate precise s-parameters for planar and 3D
structures of general shape. The MDSPICE can generate precise time domain
results from the s-parameters created by the IE3D. Besides, the MDSPICE can
also optionally convert the s-parameters into regular SPICE netlist in a
wide frequency range. The IE3D/MDSPICE should be a good combination for you.
Thanks!

Best regards,
-----------------------------------------------------------------------
Jian-X. Zheng, Ph.D
Zeland Software, Inc., 48890 Milmont Drive, 105D, Fremont, CA 94538, U.S.A.
Tel: 510-623-7162, Fax: 510-623-7135, Web: http://www.zeland.com
---------------------------------------------------------------------

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     http://www.freelists.org/archives/si-list 
Old list archives are viewable at: http://www.qsl.net/wb6tpu

Other related posts: