[SI-LIST] routing mini usb conn.

Hi  all
 
did some one rout a pcb whit a mini USB connector 
I got netlist of design that have a crossed in the diff pair of the USB
in compare white the USB controller so if I place them in the same side
of the board I cant rout them like diff pair
can someone advise in that 
 
thanks
Moshe Frid

Senior PCB Designer

Adcom Computers and Communications

17 Ha'Tidhar St. Ra'anana

Israel 43665


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: