[SI-LIST] Re: procedure for EMI/EMC testing

I would try the IEEE EMC reflector.  See instructions below.

Regards,

Istvan Novak
SUN Microsystems


---------------------------------------------------------------- 
This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/


To post a message to the list, send your e-mail to emc-pstc@xxxxxxxx


Instructions: http://listserv.ieee.org/request/user-guide.html


List rules: http://www.ieee-pses.org/listrules.html


For help, send mail to the list administrators:


Scott Douglas emcpstc@xxxxxxxxx Mike Cantwell mcantwell@xxxxxxxx


For policy questions, send mail to:


Jim Bacher: j.bacher@xxxxxxxx David Heald: emc-pstc@xxxxxxxxxxxxx


All emc-pstc postings are archived and searchable on the web at:


http://www.ieeecommunities.org/emc-pstc



Sankar.Karuppannan@xxxxxxxxxxxxxxxxxxxxxxx wrote:

>Dear All,
>I am new to EMI/EMC test. Any one can tell me the procedure for EMI/EMC 
>testing. If you have any related document, Please send it to me.
>
>Regards,
>K.Sankar
>Emuzed - A Flextronics Company,
>Bangalore.
>
>  
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: