[SI-LIST] placement (RF + Digital)

Hi

I have 2 types of components in my board RF & Digital.

One Bus is going from Oscillator to a Processor.

There are 2 grounds chassis(for RF) and GND(digial)

How do I route the BUS so that it does not cross the Valley/Cut between

 GND & Chassis so as to have Clean PATH for Return Current.

Please give your comments

 

Do you have some guidelines on "How to do placement of RF and Digital 
components on the same board?"

 

Regards

Karan


---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: