[SI-LIST] parallel plane strange results

I'm getting unexpected results. Can anyone give me some insight to what
is going on?

=20
This same effect happens if there are ports there also.

=20
I am trying to simulate the voltages and impedance at different points
and distances. I have a current source and 3 voltage probes attached to
parallel planes. One is close by and the other 2 are farther away. The
closest is V1 it has a resonance point in blue and is the lowest
resonance. The other two seem to have a resonance higher in frequency.
That is the question. The parallel plates have a constant capacitance so
that does not change. The higher resonance points would point to less
inductance and the curves would point to that also. My question is: is
that true and why? And how? I would think that the inductance is higher
since there is a farther distance.=20

=20
Here is a link to the results and also the SIwave set up

http://pg.photos.yahoo.com/ph/lifeatthesharpend/album?.dir=3D9044scd&.src=
=3D
ph&store=3D&prodid=3D&.done=3Dhttp%3a//pg.photos.yahoo.com/ph/lifeatthesh=
arpen
d/my_photos



Leonard Dieguez
HSIO group Altera

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: