[SI-LIST] output signal degradation of cmos inverter driving a RC line

 hi friends,

         I am driving a RC line with cmos inverter at
few mega hertz(using pspice), when i am appending the
RC line i am getting good output of cmos inverter, but
when i use a rc line, the signal is totally degrading.
i think it is due to low output capacitance of cmos
inverter , Am i right?. if so, what would be the
remedy?.plz i require ur help in this regard.

praveen





------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: