[SI-LIST] Re: lumped model vs distributed model

Hi everyone:
For transmission line we can always use a lumped R,L,C model to
represent a simple transmission line, or we can use a distributed model
.(I know that the distributed model is more accurate and for high freq
application we should use this model)
But my question is : what is the main difference between the lumped
model and distributed model?
If we are just using the lumped model for our SI simulation, what are we
going to miss ?
looking forward for your insight
thanks
Regards
Jason Leung




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: