[SI-LIST] Re: looking for HP probe adapters

Jonathan, thank you very much for the assistance!
Ivor

Fasig, Jonathan L. wrote:
> Ivor:  Its been a couple years now, but I recall the last time I sought
> these parts I had to contact my Agilent sales guy directly and get his
> assistance.  You are quite right that Agilent does not make it easy to
> procure these things.  Be prepared to have your order rejected because
> nobody in the Agilent order department knows about them either!  I think
> there is one old timer in Loveland with a box of these things under his
> desk.  You have to get to him somehow, which is where the sales guy can
> (hopefully) help you.  I hope this old buzzard hasn't retired yet!  Good
> luck!
> 
> jf
> 
> ------------------------------------------------------------------------
> 
> Jonathan Fasig                      Email:  fasig.jonathan@xxxxxxxx   
> Mayo Foundation 
> 4001 41st Street NW 
> MSC Sn 2-132                        Phone:  (507) 538-5464
> Rochester, MN 55901                 Fax:    (507) 284-9171
> 
> 
> -----Original Message-----
> From: Ivor Bowden [mailto:ivor@xxxxxxxxxxx] 
> Sent: Friday, May 23, 2003 2:39 PM
> To: si-list
> Subject: [SI-LIST] looking for HP probe adapters
> 
> 
> 
> Hi, I have HP10400A scope probes and I'm trying to find the PC mount 
> adapters they plug into. The HP #s for these sockets is 1250-2427 and 
> 1250-2428 (right angle & straight). They look a bit like SMB, and 
> measure about 8mm long x 3mm diameter (5/16" long x 1/8" diameter), not 
> counting the legs. Tacking these puppies into a circuit helps a LOT with 
> probing, but the 2 I have left are wearing out and I'd really like to 
> find some more. Searching the http://www.agilent.com (HP test equip 
> spinoff) web site does not find them, and I don't seem to be able to 
> match them up to any standard adapters. If anyone can help me locate 
> some of these (or perhaps suggest compatible probes w/ adapters) I'd 
> really appreciate it. Thanks,
> Ivor
> 
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> 
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
> 
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> 
> List archives are viewable at:     
>               http://www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages 
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>   
> 
> 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: