[SI-LIST] how to model the via in Sigexplorer610

Hi,

Needed information on how to model a VIA in Sigexplorer.
Is there any ready library available for via?
I could not get more info on this in Google.


Thanks
Vignesh





********************** Legal Disclaimer ****************************
"This email may contain confidential and privileged material for the sole u=
se of the intended recipient.  Any unauthorized review, use or distribution=
 by others is strictly prohibited.  If you have received the message in err=
or, please advise the sender by reply email and delete the message. Thank y=
ou."
**********************************************************************

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: