[SI-LIST] Re: extraction of RLGC when there is no referenceplane
- From: "Abe Riazi" <ariazi@xxxxxxxxxxxxxxx>
- To: "'si-list@xxxxxxxxxxxxx'" <si-list@xxxxxxxxxxxxx>
- Date: Mon, 10 May 2004 11:31:09 -0700
Dear Zhangkun:
A conductor geometry with no reference planes can be analyzed
using a 2-D electromagnetic field solver (such as HSPICE's ) which =
require a=20
reference plane.
This is achieved by incorporating a ground plane but forcing the
distance from the plane to the conductor(s) to be very large.
Best Regards,
Abe Riazi
ServerWorks
-----Original Message-----
From: Zhangkun [SMTP:zhang_kun@xxxxxxxxxx]
Sent: Saturday, May 08, 2004 9:27 PM
To: si-list
Subject: [SI-LIST] extraction of RLGC when there is no reference plane
Dear all:
In Hspice, there must be one reference plane. We are analyze some =
transmission line which have no reference plane. Which tools is suitful =
for this kind situation?
Best Regards
Zhangkun
2004.5.9
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
