[SI-LIST] Re: creating an IBIS model...
- From: "lgreen" <lgreen22@xxxxxxxxxxxxxx>
- To: <zhang__feng@xxxxxxxx>, <si-list@xxxxxxxxxxxxx>, <si-list-bounce@xxxxxxxxxxxxx>
- Date: Mon, 28 Feb 2005 10:05:18 -0800
Hello, Zhang,
The state of an I/O buffer is a simulation parameter. It is not part of =
the
IBIS file.
Most SI simulators have an interface to help you set up the state for =
the
I/O buffer.
- Lynne
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] =
On
Behalf Of zhangfeng
Sent: Sunday, February 27, 2005 7:03 PM
To: si-list@xxxxxxxxxxxxx; si-list-bounce@xxxxxxxxxxxxx
Subject: [SI-LIST] creating an IBIS model...
Dear all,
If I want some pin of an IC driving high(1), or low(0),
what can I do???
Does JTAG fit this job?
Or, the only way is asking the vendor for utility software?
----------------------------------------------
=C8=AB=C4=DC=C1=C4=C2=CC=C9=AB=C9=E7=BD=BB=A3=AC=CC=EC=CC=EC=B8=D0=CA=DC=D0=
=C2=CF=CA=BA=CD=C0=CB=C2=FE=20
http://callme.21cn.com/=20
=B2=CA=C6=C1=CA=D6=BB=FA=B0=D7=CB=CD=C0=B2!=B8=CF=BF=EC=C0=B4=C4=C3!=20
http://qipai.g.21cn.com=20
=D6=C7=BB=DB=B4=F3=CC=F4=D5=BD=BE=CD=D4=DA=B5=CD=BC=DB=B6=E1=B1=A6=20
http://super.21cn.com/=20
=CC=E5=D1=E9=C1=ED=C0=E0=D4=BC=BB=E1=A3=AC=B8=D0=CA=DC=B1=F0=D1=F9=C0=CB=C2=
=FE=20
http://y.21cn.com/club/=20
=D0=A1=C1=E9=CD=A8=B6=CC=D0=C5=D6=D0=D0=C4=A3=AC=B6=CC=D0=C5=F7=C8=C1=A6=CE=
=DE=BC=AB=20
http://pas.21cn.com/=20
21CN=D3=CA=CF=E4,=BD=AB=D0=C2=C4=EA=BB=B6=D0=A6=C1=A2=CC=E5=B3=CA=CF=D6=20
http://mail.21cn.com/huodong/0501/newyear=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- Follow-Ups:
- [SI-LIST] Re: creating an IBIS model...
- From: Tom Dagostino
- References:
- [SI-LIST] creating an IBIS model...
- From: zhangfeng
Other related posts:
- » [SI-LIST] creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- » [SI-LIST] Re: creating an IBIS model...
- [SI-LIST] Re: creating an IBIS model...
- From: Tom Dagostino
- [SI-LIST] creating an IBIS model...
- From: zhangfeng