[SI-LIST] copper thickness of a ref plane

From: "Peterson, James F (FL51)" <james.f.peterson@xxxxxxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Wed, 20 Jun 2001 16:30:51 -0400

Because of physical limitations, I am considering reducing all of the ref
planes on a design to 1/2 oz. copper (was 1 oz. copper). The board level
logic is 3.3V CMOS. Does anybody see any problems with doing this?

thanks,
Jim 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     http://www.freelists.org/archives/si-list 
Old list archives are viewable at: http://www.qsl.net/wb6tpu

Follow-Ups:

[SI-LIST] Re: copper thickness of a ref plane
From: Perry Qu

[SI-LIST] copper thickness of a ref plane

Other related posts: