[SI-LIST] Re: command line impedance calculator

You said you are not interested in GUI-based calculators. BUT ........
At the higher end of the spectrum is the Polar Calculator, especially 
the Si8000 Excel version (not exactly GUI, but not exactly command 
line, either.). It is beautifully equipped to do "what if" and 
sensitivity analyses.



At 09:41 PM 3/16/2009, Sanjeev Gupta wrote:
>Hello all,
>I want to create worst case stack-up models, I need to do lot of iterations
>for Z0 calculation.
>is there any command line impedance calculator, which can be embedded into
>scripts.
>I should be able to specify input parameter in text file and get output in
>txt format. I am not interested in GUI based calculators.
>Thanks
>Sanjeev
>
>
>-


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: