[SI-LIST] can a bus hold circuit amplify crosstalk?

Can a bus holder amplify crosstalk?

The circuit consists of a bus holder in a receive buffer, that is driven by
buffer with a 50 ohm source Z (so a somewhat weak driver), and this driver
is on another board with a backplane in between.

The signal trace picks up xtalk while traversing the backplane. The bus
holder in the receive buffer sees this xtalk, the holder was at a "0", but
now this looks like a "1" and so it tries to toggle the line.

The receive buffer in this example is a 54abth32245 (5v).

The driver is a 54abt162244 (5v). Which is a relatively weak driver
(contains a 25 ohm series term).

When the driver is switched to a strong driver (54abt16244 @ 64ma/32ma) the
problem goes away.

Has anybody seen anything similar? Does this scenario look feasible?

thanks,
Jim Peterson
Honeywell
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: