[SI-LIST] Re: ac drive strength

Hi All,


I had a silly question that I wanted to throw 
out to the group in an effort to save time.  I 
am looking to perform an end to end sim where I 
have two components, a quick switch and a connector.
The quick switch sits between the driver and the 
connector.  I have ibis models for the parts and
can not get spice models in the time frame that I
would need them.  I have single line models for 
the connector.  So, would I be better off bringing
the driver and receiver models into hspice or per
form the sim in the ibis domain?  Is there an 
equivalent circuit model for the quickswitch?  I 
noticed that there were rev 2.1 ibis models on the
IDT site (formerly quality semi) but I didn't recall
being able to sim through a device like this.  If 
not, what are these models for.

Thanks for the help.

Michael Greim

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: