[SI-LIST] ac drive strength

From: "Peterson, James F (FL51)" <james.f.peterson@xxxxxxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Mon, 23 Jul 2001 13:30:10 -0400

Hello,

What's the best way to specify the ac drive strength of a buffer? The
requirement should be testable.

I was thinking about defining it with a source impedance at typical
voltage/temp's....any suggestions on how to test this?

thanks,
Jim 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Follow-Ups:

[SI-LIST] Re: ac drive strength
From: Chuck Hill

[SI-LIST] Re: ac drive strength
From: D. C. Sessions

[SI-LIST] ac drive strength

Other related posts: