Hello Olivia,
If you are using a more modern scope, then you should be able to save
the data directly on the scope and sneaker-net it to your system on a 3.5"
floppy. Most scopes come with a windows interface and an ether net port so
you can save directly on a network.
If you are using an older scope, Tek has a software tool called
Wavestar and HP/Agilent has a similar tool called Benchlink. I would
suggest you talk to your local rep to get the training you need to use the
scope and or software.
Regards
-Ed
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu