[SI-LIST] Vdd inductance and SSO/ground bounce.

I need to simulate the effects of ground bounce/SSO on a double-sided 
very narrow PWB. The bottom is a solid ground plane, while the top has 
impedance controlled traces, with a Vdd flood everywhere else on the 
top. I have calculated the Vdd inductance, but I want to verify it with 
a measurement. Do I need to rent a network analyzer, or can I measure 
Vdd inductance directly with our HP 4285A LRC meter?

-- 
Russell Rapport
Senior Design Engineer II
Staktek
512-454-9531 x224 voice
512-454-9409 fax

NOTICE:  This electronic transmission (and any attached document) contains 
information that is considered Staktek confidential or privileged. It is 
intended only for the person to whom it is addressed. Use of this information 
is controlled by our duly executed Non-Disclosure Agreement (on file). 
Unauthorized use, disclosure, copying, or distribution of this transmission 
(and any attached document) is strictly prohibited and may expose you to legal 
liability. If you have received this transmission in error, please immediately 
notify me by telephone.





------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: