[SI-LIST] VSWR using the TDR Measurements.

Hi Folks,
 
I am trying to use the Characteristic impedence value that I obtained from the 
TDR measurements, at TrisePps to calculate the VSWR(I cannot use a network 
analyser, don't have microprobes).
 
I was going to plug in the Z0 value into reflection coefficient formula and 
then into VSWR Formula.
 
Do you think that this a right approach to calculate the VSWR. If so how do 
I account for the VSWR to change with frequency.
 
Thanks for any thoughts.
 
Padma
 

      
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: