[SI-LIST] VME connector models
- From: Surjendra Goswami <jackie1234@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Fri, 26 Aug 2005 13:19:16 +0530
Hi all,
I was searching for SLM models for the VME P0, P1, P2 connectors but
could not locate any from the manufacturers(Harting) site. Where can
i locate these models?
Also do the model parameters vary for different manufacturers?
Regards
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- Follow-Ups:
- [SI-LIST] Re: VME connector models
- From: Dr. Edward P. Sayre
Other related posts:
- » [SI-LIST] VME connector models
- » [SI-LIST] Re: VME connector models
- » [SI-LIST] Re: VME connector models
- » [SI-LIST] Re: VME connector models
- » [SI-LIST] Re: VME connector models
- » [SI-LIST] Re: VME connector models
- » [SI-LIST] Re: VME connector models
- » [SI-LIST] Re: VME connector models
- » [SI-LIST] Re: VME connector models
- [SI-LIST] Re: VME connector models
- From: Dr. Edward P. Sayre