[SI-LIST] Re: UltraCAD ESR and Bypass Capacitor Caculator
- From: Mark Alexander <mark.alexander@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 12 Aug 2003 14:31:41 -0600
A note to the list...
I don't like to see conversations squelched before they're over. If you're
tired of the thread, stop reading it, and don't respond! We're all pretty
familiar with the subject line by now so they're not hard to delete.
Yes, we've been over this ground before (a few too many times for my taste), but
if people want to keep bantering, they should be able to.
-mark
"Muranyi, Arpad" wrote:
> Chris,
>
> They gave a pretty good description of what it was made for and why
> earlier in this thread. Look it up in the archives. And I second
> Scott, let's put this thread behind us, please!
>
> Arpad
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
> -----Original Message-----
> From: Scott McMorrow [mailto:scott@xxxxxxxxxxxxx]
> Sent: Tuesday, August 12, 2003 12:59 PM
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: UltraCAD ESR and Bypass Capacitor Caculator
>
> Chris,
> Go get'm.
> I'm bored and tired of this thread.
>
> scott
>
> Chris Cheng wrote:
>
> >Then what's the use of it if it can't take the placement into =
> consideration
> >and calculate loop inductance of the leads/pads of the caps in the PCB =
> which
> >I think will easily dominate over the ESL of the cap ?
> >
> > -----Original Message-----
> >From: Doug Brooks [mailto:doug@xxxxxxxxxx]=20
> >Sent: Tuesday, August 12, 2003 9:13 AM
> >To: si-list@xxxxxxxxxxxxx
> >Subject: [SI-LIST] Re: UltraCAD ESR and Bypass Capacitor Caculator
> >
> >While I've enjoyed the entire discussion under this heading, I feel =
> like I=20
> >have to say once again that the UltraCAD calculator says NOTHING at all =
>
> >about placement. THAT discussion picked up under this heading some how. =
> Our=20
> >calculator is just one (repeat "one") way to calculate a a complex=20
> >impedance function.
> >
> >Doug
> >
> >At 03:56 PM 8/12/2003 +1000, you wrote:
> > =20
> >
> >> it may be a good idea to put
> >> =20
> >>
> >
> >Doug Brooks' new book, "Signal Integrity Issues and Printed Circuit =
> Board=20
> >Design" has just been released by Prentice Hall. See details and =
> ordering=20
> >info at www.ultracad.com
> >________________________________________________________________________=
> ____
> >__
> >
> >
> >------------------------------------------------------------------
> >To unsubscribe from si-list:
> >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> >or to administer your membership from a web page, go to:
> >//www.freelists.org/webpage/si-list
> >
> >For help:
> >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >List archives are viewable at: =20
> > //www.freelists.org/archives/si-list
> >or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages=20
> >Old (prior to June 6, 2001) list archives are viewable at:
> > http://www.qsl.net/wb6tpu
> > =20
> >------------------------------------------------------------------
> >To unsubscribe from si-list:
> >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> >or to administer your membership from a web page, go to:
> >//www.freelists.org/webpage/si-list
> >
> >For help:
> >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >List archives are viewable at: =20
> > //www.freelists.org/archives/si-list
> >or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages=20
> >Old (prior to June 6, 2001) list archives are viewable at:
> > http://www.qsl.net/wb6tpu
> > =20
> >
> > =20
> >
>
> --=20
> Scott McMorrow
> Teraspeed Consulting Group LLC
> 2926 SE Yamhill St.
> Portland, OR 97214
> (503) 239-5536
> http://www.teraspeed.com
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at: =20
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages=20
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
> =20
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
