[SI-LIST] Two Layer routing

Hi Friends ,
PCB routing in a two layer PCB with out power planes is definitely
not advisable.Noisy ,EMI .....

I believe cross talk will be worse too.Is the capacitive coupling
or the inductive coupling which makes the cross talk bad in the two layer
cases ?

Could some one pls explain this.

Thanks in advance!!

regards
Sunil . Bh

       
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
 Check outnew cars at Yahoo! Autos.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: