[SI-LIST] Twisting of differential pair traces

I have a question regarding routing differential signals on a board. 
For the case that the pair of traces of a given differential pair travels
from layer to layer using vias, what is the effect if the traces are allowed
to twist?. That is, what is the effect of having the plus trace on one side
of the pair on a layer, and then having it on the other side on another
layer (after transitioning thru vias)? (I hope I am able to explain the
"twist" issue).

Any comments are welcome.

Regards,
Joaquín

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: