[SI-LIST] Total Least Squares Method

Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
Dear All
 
Recently, we are studying to get IC current noise source based on the
measurement noise. Because there is some unavoidable error, the current
source would be wrong. I noticed that somebody is using "Total Least Square"
method to eliminate the error. I want learn about this method. Any advice
would be helpful.
 
Best Regards
 
Zhangkun
2007-2-17



-- Binary/unsupported file stripped by Ecartis --
-- Type: image/jpeg
-- File: image001.jpg


-- HTML Attachment decoded to text by Ecartis --
-- File: header.htm

 


----------------------------------------------------------------------------



----------------------------------------------------------------------------



----------------------------------------------------------------------------



----------------------------------------------------------------------------


  



  

文档名称

文档密级

  

  

 TIME \@ "yyyy-M-d" 2007-2-17 

华为机密，未经许可&#19981
得扩散

第PAGE1页, 共NUMPAGES  \* Arabic  \* MERGEFORMAT 1页


  

  

  

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: