Anyone out there using the new Cadence tool, Allegro PCB SI 630? I'm interested in other's experiences and feedback about whether they think this tool is effective standalone, or needs to be used in conjunction with other tools. Private feedback is both welcome and appreciated - I don't want to make people uncomfortable by debating a particular tool's merits in a general forum, but I do need to talk to other users to gain another perspective besides our own. Thanks, Todd. Todd Westerhoff High Speed Design Specialist Cisco Systems 1414 Massachusetts Ave - Boxboro, MA - 01719 email:twesterh@xxxxxxxxx ph: 978-936-2149 ============================================ "Always do right. This will gratify some people and astonish the rest." - Mark Twain ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu