[SI-LIST] Time step for plotting eye patterns

All,

When I plot eye patterns in A-Waves I plot against a saw tooth created with
a param statement.  To get good results I need to set the time step very
short so that the sawtooth goes full swing.

My thought is there must be a relationship between the time step and the
unit interval that allows the sawtooth to go full swing without resorting to
a 1ps timestep.

Thanks.



John Ellis

Vice President
Interconnect Technology

TriCN, Inc.

3605 Vartan Way
Suite 301
Harrisburg, PA  17110

Phone:717-657-1002
Fax:  717-221-1185
email:jellis@xxxxxxxxx

www.tricn.com

This email message is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. Any unauthorized review,
use, disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and destroy all copies
of the original message.



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: