[SI-LIST] Re: Stack up for EMI reduction, plane resonance and u-strip radiation etc etc

  • From: "Istvan NOVAK" <istvan.novak@xxxxxxxxxxxxxxxx>
  • To: "Chris Cheng" <Chris.Cheng@xxxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
  • Date: Tue, 10 Feb 2004 20:55:28 -0500

Chris,

See my comments below.

Regards,

Istvan Novak
SUN Microsystems

> Istvan,
>
> You got me on this one, I really need to figure out where can the
200-400MHz
> noise on PCB comes from ?
> Is it :
> a) Core noise, IC internal switch noise which propagate through the
package
> power pins to the PCB
> Ans : Beaten to death, package is the choke point. EMI noise radiates from
> package not PCB

Are you sure that the resonance frequencies of the package and PCB are
always exactly
the same?  If the PCB resonance lines up with the excitation frequency,
while the
package structural resonances dont, a relatively large attenuation through
the
package-board interface still cant block harmful radiation from the board
(before you ask: such situations were measured on real boards).

> b) I/O switching noise, comes out from signal pins needs a return path the
> I/O power
> Ans : Managing the return path and reference plane not the decoupling
caps.
> Yes, the plane CAPACITANCE not inductance provides the return path for the
> image current return through the opposite reference ground plane.

Capacitance or inductance and thin laminate: OK lets ask a different
question.
You say you need plane capacitance.  Is the required amount of plane
capacitance
independent of how many traces the plane has to reference?  Do you want
more plane capacitance if the same plane area references faster and more
traces?

> c) External terminators,
> Ans : The resistance of the terminator is the damping factor
> d) Noise from the supply
> Ans : 200-400MHz noise from a supply ??????

Several hundred MHz noise may come from the converters, though
I agree that if a converter does that it is not the best converter, but it
still
can meet all the other functional spec (and again: it was measured on
real parts).


> e) External cable coupling
> Ans : ferrite beads and chokes
>
> Aside from the above, none of which is related to fancy decoupling caps or
> thin core PCB, where else ?
>
> Chris
>


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: