[SI-LIST] Shielding Question
- From: "Clewell, Craig" <Cclewell@xxxxxxxxxxxxx>
- To: "'jain.nitin@xxxxxxxxx'" <jain.nitin@xxxxxxxxx>, si-list@xxxxxxxxxxxxx
- Date: Tue, 20 Jun 2006 12:29:40 -0400
I have polled a couple of colleagues, but wanted to throw this out the list
just to see what kind of feedback it would generate.
If you have a shielded differential pair and you need to test the shielding
effectiveness how do you go about setting up the differential pair? I
realize in a coax scenario this would be pretty straight forward, but for
the differential pair I'm a little confused and here is why.
You send a signal into the chamber via an antenna. You have a reference
antenna hooked up and you also have the DUT hooked up. However, how do
you connect the differential pair? Do you measure the SE of each line
individually, and ground the other leg of the diff pair on the far end,
while terminating on the near end of the quite line? Do you measure both
channels of the diff pair at the same time as a sort of common mode
configuration?
I know that one way of doing this would be to make 2 measurements; one with
the shield and one without, but is there a way to make the measurement one
time using one set up?
Thanks for your insight,
Craig
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.1/369 - Release Date: 6/19/2006
|**************************************************************************|
This email is intended only for the person or entity to which it is
addressed and may contain confidential, proprietary and/or privileged
material. Any review, distribution, reliance on, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you receive this message in error, please immediately notify
the sender and delete it and all copies of it from your system. Thank you.
|**************************************************************************|
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- Follow-Ups:
- [SI-LIST] Re: Shielding Question
- From: Xilei Liu
Other related posts:
- » [SI-LIST] Shielding Question
- » [SI-LIST] Re: Shielding Question
- » [SI-LIST] Re: Shielding Question
- » [SI-LIST] Re: Shielding Question
- [SI-LIST] Re: Shielding Question
- From: Xilei Liu