[SI-LIST] Re: Shape factors for sheet resistance based estimations


> I'd like to figure out the resistance between two points on a PCB.
> I've used the sheet resistance "square" trick before for trivially
> simple shapes but now I'm looking at a shape that I'm not really sure
> how to turn into component squares.  ...

In case the paperwork approach doesn't work out...

Have you considered building a scale model?  Just take some PCB material with 
copper on at least one side and cut it to the right shape.  Then measure.

-- 
The suespammers.org mail server is located in California.  So are all my
other mailboxes.  Please do not send unsolicited bulk e-mail or unsolicited
commercial e-mail to my suespammers.org address or any of my other addresses.
These are my opinions, not necessarily my employer's.  I hate spam.



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: