[SI-LIST] Re: Serpentine patterns for length matching
- From: "Jack Olson" <pcbjack@xxxxxxxxx>
- To: otter30@xxxxxxxxxxxxx
- Date: Thu, 23 Oct 2008 12:21:39 -0500
I think that is the default setting for Mentor Graphics,
and I've never heard anyone complain about it.
I've NEVER seen trace width changes in serpentine bends.
Jack
.
On Thu, Oct 23, 2008 at 10:21 AM, <otter30@xxxxxxxxxxxxx> wrote:
> Hello,
> Does anyone know of general guidelines for the serpentine patterns used to
> match net lengths?
>
> We have a board with lots of diff pairs, and our board designer made the
> serpentines very
> tight. The separation between the adjacent bends of a pair is the same as
> the spacing of the
> traces in the pairs themselves. This seems to imply imedance variations if
> the trace widths
> don't change in the bends.
>
> Any insights would be greatly appreciated,
> Jim
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Serpentine patterns for length matching
- From: otter30
Other related posts:
- » [SI-LIST] Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching
- » [SI-LIST] Re: Serpentine patterns for length matching - Jim Hall
- [SI-LIST] Serpentine patterns for length matching
- From: otter30