[SI-LIST] Safety Relaibility concerns with thin single ply pre-pregs

Does every one have any papers/information regarding the reliability/safety of 
using thin single ply pre-pregs to seperate plane layers. I understand that the 
pre-pregs can become contaminated and this can potentially lead to failure as 
was pointed out in the September 2006 thread :-

[SI-LIST] Re: What is the acceptable minimum pre-pregthickness for volume 
manufacturing?

I would just like a bit more information as to where the pre-preg thicknesses 
at which this becomes a concern, without using specialist materials.


Regards

John

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts:

  • » [SI-LIST] Safety Relaibility concerns with thin single ply pre-pregs