[SI-LIST] SPLIT PLANE GAP



Hi
     AGTLP signals are passing over a split plane (3.3v plane Vtt plane).
Frequency of these signals is 133MHz.
Rise time & Fall times are 0.75ns, 0.9ns respectively. These signals are routed
on BOTTOM layer (Micro strip).
3.3 v plane and Vtt plane split gap is 100mil maximum.
----------------Top layer
----------------Gnd
----------------Signal
----------------Signal
----------------3.3v & VTT (split)
----------------Bottom layer
          I have found there is no effect of split gap (25mil to 100mil) on
signal quality and timing.
We can calculate wavelength from Tr & Tf values, but what is the maximum split
gap can be allowed for such a design?
I don't know how much it will affect EMI, can any one suggest?

regards
Goutham Sabavat






------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: