[SI-LIST] Re: SIwave error : BAD_INPUT
- From: "Buchs, Kevin J." <buchs.kevin@xxxxxxxx>
- To: khemani_manish@xxxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Tue, 29 Aug 2006 13:38:42 -0500
Manish,
I have found it helpful to take a look at the .slog file in the
.siwaveresults subdirectory that SIwave creates. The messages given in the
GUI can be very cryptic, but sometimes that .slog file has much more
information. Have you had any successful runs? If so, compare the slog
file from one of those to the failing one and you can get an idea of where
it failed.
Kevin Buchs Mayo Clinic 200 1st St. SW Rochester, MN 55901
buchs.kevin@xxxxxxxx 507-538-5459 http://www.mayo.edu/sppdg
> -----Original Message-----
> From: Manish Khemani [mailto:khemani_manish@xxxxxxxxx]
> Sent: Monday, August 28, 2006 6:34 PM
> To: SI-list
> Subject: [SI-LIST] SIwave error : BAD_INPUT
>
> Hello all,
> I have just started to play with the s/w SIwave. I am trying
> to create two planes and want to solve the resonant modes in
> the cavity formed between the planes.
>
> I am drawing 40x30 planes on the metal layers 1 and 3. I am
> following the exact procedure given in the Ansoft's SIwave
> start up guide. But when I am simulating I get the error with
> the error message BAD_INPUT. I dont know where I am going wrong.
>
> Will appreciate your help.
>
> Thanks,
> Manish Khemani
> Graduate Student
> California State University, Northridge
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- Follow-Ups:
- [SI-LIST] Chips, Circuits to extend length of DVI-I, DVI-D, DVI-A and USB cables
- From: Bashir, Shiraz \(GE Healthcare\)
Other related posts:
- » [SI-LIST] SIwave error : BAD_INPUT
- » [SI-LIST] Re: SIwave error : BAD_INPUT
- [SI-LIST] Chips, Circuits to extend length of DVI-I, DVI-D, DVI-A and USB cables
- From: Bashir, Shiraz \(GE Healthcare\)