Hello Guys. I am in need of the following type consultant for a 6 month project in San Jose, CA: This group out is supporting a group which is developing a "test" chip. It looks like they have the board design expertise, so they just need a strong Signal Integrity "expert"....as they referred to it. So your role will be SI analysis and simulations using SPICE and/or specctraquest. These boards are running at 200-300 mghz, so having high-speed board design experience is very important to them. The other piece of the project that is key is the SDRAM/DDR memory interface experience, and the SSTL I/O's that go along with it. Here is a breakdown of what is required: Musts: - Signal integrity - HSPICE - SDRAM/DDR - SSTL (I/O) - understand up high speed (200-300 mghz) board designs Plus: - specctaquest (highly preferred but not required) - HSTL - RLDRAM PLease contact ASAP if qualified and able to commit to 40 hrs/week onsite in California. Regards, Kevin D. Pierpoint Technical Recruiter Oxford & Associates, Inc. (w) 408-245-3915 x111 (c) 408-242-1518 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu