[SI-LIST] Re: SI Intro for your review (If you need support on High Speed Design and Signal Integrity)

  • From: "john lipsius" <johnlipsius@xxxxxxxxx>
  • To: <jacque@xxxxxxxxxxxxxx>, <sales@xxxxxxxxxxxxxx>,<info@xxxxxxxxxxxxxx>
  • Date: Mon, 10 Nov 2003 18:32:36 -0800

All,
Let me be the second... what fun...

http://pbskids.org/teletubbies/hints/nurseryrhyme8.html

the old nursery school rhyme...
Frère Jacques,
Frère Jacques,
Dormez-vous?
Dormez-vous?
Sonnez les matines,
Sonnez les matines,
Ding, dang, dong!
Ding, dang, dong!

translation...
Brother Jacques,
Brother Jacques,
Are you sleeping?
Are you sleeping?
Morning Bells are ringing,
Morning Bells are ringing,
Ding, dang, dong!
Ding, dang, dong!


It's morning, Jacque (you forgot the "s").  And
morning bells are ringing.  But I don't think you have
the awareness to wake up to the foolishness you
display....  perhaps most of the subscribers to this
list are the ones which you say you can replace with
your minions.  To wit:

"Our firm is able to save you lots of money by offering you more than
one individual for a fraction of the annual Salary of one Signal Integrity
Engineer."

Well, for practically zero dollars you have advertised yourself and your
company as committed to undermining further the employment
situation in engineering, especially for US citizens (as they are most
affected).   Your stunning lack of awareness leads one to believe
you're actually not very sharp in engineering, as well.

So, not only have you aimed the gun at your foot, but you're a poor
shot, for the bullet ended up in the head.
An honest reaction may well be:  get a real job in your own
country perhaps, not as a parasite here.
But don't take it too personally.  It's just an honest reaction.
-bye now

  ----- Original Message ----- 
  From: Tom Dagostino
  To: jacque@xxxxxxxxxxxxxx ; si-list-bounce@xxxxxxxxxxxxx
  Cc: si-list@xxxxxxxxxxxxx
  Sent: Monday, November 10, 2003 5:15 PM
  Subject: [SI-LIST] Re: SI Intro for your review (If you need support on High 
Speed Design
and Signal Integrity)


  Jacques

  Let me be the first to slam you for commercial use of this system.  Its a
  no-no, against the rules, verboten.  This is supposed to be a forum for
  exchange of ideas and questions.

  Congrats on your first piece of negative PR for your firm.

  Tom Dagostino
  Teraspeed Consulting Group LLC     Teraspeed Consulting Group LLC
  2926 SE Yamhill St.                Device Modeling Division
  Portland, OR 97214                 13610 SW Harness Lane
                                     Beaverton, OR 97008
  http://www.teraspeed.com           503-430-1065
  tom@xxxxxxxxxxxxx


  -----Original Message-----
  From: si-list-bounce@xxxxxxxxxxxxx
  [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Jacque@xxxxxxxxxxxxxx
  Sent: Monday, November 10, 2003 4:22 PM
  To: si-list-bounce@xxxxxxxxxxxxx
  Cc: si-list@xxxxxxxxxxxxx
  Subject: [SI-LIST] SI Intro for your review (If you need support on High
  Speed Design and Signal Integrity)


  Dear Sir / Madam,




  As you know with the increasing demand for High Speed Design and Signal
  Integrity, we have noticed that your company also could be looking

  for certain design engineering firms and high speed design engineering teams
  with Signal Integrity & High Speed Design experience.

  Our firm is able to save you lots of money by offering you more than one
  individual for a fraction of the annual Salary of one Signal Integrity
  Engineer.

  I represent the company called Sintegrity Corporation located in Irvine, CA
  USA, and we are a specialized board design and circuit simulation Company.

  We have expertise in various areas such as Simulation, layout and trouble
  shooting (System, sub system, PCB)

  At any point we could at least allocate 10 very experienced Designers to
  handle your project bandwidth.

  We also have a much larger network of qualified Consultants.



  Sintegrity is a research and design based company specialized in Signal
  Integrity for High Speed design applications including



  SONET, Fibernet, Gigabit Ethernet, SFP, Add/Drop, Mux, Demux (SH, MR, LH),
  Xaui, Backplane, Storage, Serial ATA, Set Top Boxes, 802.11b/g, Bluetooth,
  3G, PCI-Express.



  For your information our designers are very experienced with designs using
  chipsets like Broadcom, Conexant, Intel, Vitesse, AMCC and Qlogic.



  We provide design and consultation services for Package, Board and System
  level integration.

  We also do offer our strategic alliance with our customers to provide turn
  key solutions for Evaluation boards and complex Substrate designs.



  Our services cover concept to finished product roadmaps.



  Services include:



  .     Signal Integrity and EMC Analysis.

  .     High Speed PCB Design & Layout

  .     Design Debug Services for partially completed Projects

  .     Circuit Simulation, Characterization & Package Design

  .     Schematic Design & Capture

  .     Manufacturing, Test and Assembly services

  .     PCB & PACAKGE-SUBSTRATE Design and LAYOUT Services

  .     Prototype Fabrication Services

  .     EMC Consultation

  .     Engineering training in EMC and Signal Integrity.

  .     Time-to-Market Consultation

  .     Cost-Reduction Services

  .     Component Engineering



  Please review our attached Intro Card and our Info on our website and let me
  know when it is a good time to contact you via telephone to discuss your
  current or next project.





  Thank you





  Jacque Amirghahari
  Director of Global Sales
  SINTEGRITY Corporation
  "Your Source for Signal Integrity"



  Toll Free Phone: 866-9SIGNAL
                           866-9744625


                Phone: 949-707-0020



    Toll Free FAX: 866-4SINTEGRITY
                          866-44768347489


                  FAX: 949-707-0024



               Email: jacque@xxxxxxxxxxxxxx
           WebSite: http://www.sintegrity.com







  All information contained in this message is privileged, confidential, and
  protected from disclosure. This message is intended for the individual or
  entity addressed herein. If you are not the intended recipient, do not read,
  copy, use or disclose this communication to others, in addition, notify the
  sender by replying to this message, and then completely erase it from your
  system.




  ------------------------------------------------------------------
  To unsubscribe from si-list:
  si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

  or to administer your membership from a web page, go to:
  //www.freelists.org/webpage/si-list

  For help:
  si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

  List archives are viewable at:
  //www.freelists.org/archives/si-list
  or at our remote archives:
  http://groups.yahoo.com/group/si-list/messages
  Old (prior to June 6, 2001) list archives are viewable at:
    http://www.qsl.net/wb6tpu


  ------------------------------------------------------------------
  To unsubscribe from si-list:
  si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

  or to administer your membership from a web page, go to:
  //www.freelists.org/webpage/si-list

  For help:
  si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

  List archives are viewable at:
  //www.freelists.org/archives/si-list
  or at our remote archives:
  http://groups.yahoo.com/group/si-list/messages
  Old (prior to June 6, 2001) list archives are viewable at:
    http://www.qsl.net/wb6tpu



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: