> All I am wondering about is what other people who have _designed_ > actual borads do use as resitors - a handfull of 0603, 0402, what? Where do I get them? > Any suitable arrays? I did try searching without much luck, otherwise I would not have > asked this... If you don't mind BGAs try these: http://www.ctsclearone.com/components/clearone.asp ======================= Mikhail Matusov Hardware Design Engineer Square Peg Communications Tel.: +1 (613) 271-0044 ext.231 Fax: +1 (613) 271-3007 http://www.squarepeg.ca ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu