[SI-LIST] Re: RLGC Parameters

Mr./Ms/Mrs. Delay, 

I don't use CST, but is possible that they are splitting the series R and L
in 1/2, and putting each half on both sides of the shunt C and G?

Regards, 

Mr. Clewell

-----Original Message-----
From: group_delay [mailto:group_delay@xxxxxxxxx]
Sent: Thursday, October 16, 2003 4:55 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] RLGC Parameters


Hi,
My understanding is that when you specify RLGC parameters, you have 
R and L in series followed by C and G in parallel. However, I am 
using a software called CST which is generating RLGC parameters 
which have 6 elements. It looks like:

R---L------R----L
      | |
      C G
      | |
      GND GND

I need to relate this model to the 4 element model. Can someone 
please help?

Thanks.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: