[SI-LIST] RDRAM termination

Hi,

One of my projects requires RDRAM. I understand that termination is
needed at the end of channel to eliminate/minimize reflection. My
question is do I still need these termination resistors if there is only
one RDRAM device ( not the module ) on the channel? I'm trying to save
power and board space here. Your opinion and experience are greatly
appreciated.

Dan

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: