[SI-LIST] Re: RC termination

(1)  I doubt that a polarized capacitor would be used for RC termination
at the board level.  On-chip?  I don't know.

(2)  Why should the CAD tool care?  I get suspicious when a CAD tool
imposes limitations like this.  Sooner or later there could be
exceptions that you didn't think of.

Regards,
Andy


> I am using an R-C termination at receiver pin.
> Have any one of you used a polarized capacitor in R_C termination =
> scheme?
> 
> I am working with a CAD company CADENCE. I just want to know if there
> is =
> possibility of user/designer doing this ?
> 
> Regards
> Nimish
> 
> 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: